1.1. HORTON Development with Git

HORTON uses Git for version control.

A version control systems (VCS) allows many people to copy and modify the same source code while keeping track of all changes made. The VCS software also helps you merge different developments into one common source tree.

This section goes through the basics of VCSs to get you started with a developer installation of HORTON. When working on a development version of HORTON, most of the Download and Installation instructions for released versions of HORTON are still applicable, except for some additional steps explained below.

1.1.1. Additional steps required to build the development version of HORTON

1.1.1.1. Reference atoms

Several parts of HORTON make use of reference atomic computations. These files are too large to be included in the git revision system. Therefore, they must be downloaded separately when compiling a development version of HORTON:

(cd data/refatoms; make all)

1.1.1.2. Other development tools

If you want to contribute to the development of HORTON, the following tools will be convenient:

For the python development tools, we generally recommend installing the latest versions with pip.

Ubuntu Linux 16.04

sudo apt-get install python-sympy cppcheck git
pip install --user --upgrade pylint pycodestyle pydocstyle coverage GitPython

Ubuntu Linux 15.04 and 14.04

sudo apt-get install python-sympy cppcheck git
pip install --user --upgrade pylint pycodestyle pydocstyle coverage GitPython

Fedora Linux 24 and up

sudo dnf install sympy cppcheck git
pip install --user --upgrade pylint pycodestyle pydocstyle coverage GitPython

Fedora Linux 22 and 23

sudo dnf install sympy cppcheck git
pip install --user --upgrade pylint pycodestyle pydocstyle coverage GitPython

MacPorts

These are the required ports:

sudo port install py27-sympy; sudo port select --set py-sympy py27-sympy
sudo port install cppcheck
sudo port install git
pip install --user --upgrade pylint pycodestyle pydocstyle coverage GitPython

1.1.1.3. Building the documentation

If you are interested in generating the documentation from source, the following packages are also needed:

These can be installed as follows.

Ubuntu Linux 16.04

sudo apt-get install python-sphinx python-sphinx-rtd-theme doxygen \
            python-docutils

Ubuntu Linux 15.04 and 14.04

sudo apt-get install doxygen python-docutils
pip install --user --upgrade sphinx sphinx_rtd_theme breathe

Fedora Linux 24

sudo dnf install python2-sphinx python2-sphinx_rtd_theme doxygen \
            python2-breathe python-docutils

Fedora Linux 22 and 23

sudo dnf install doxygen python-docutils
pip install --user --upgrade sphinx sphinx_rtd_theme breathe

MacPorts

These are the required ports

sudo port install doxygen
pip install --user --upgrade sphinx sphinx_rtd_theme breathe

You must also manually build LibXC as explained in From-source dependencies for building, installing and testing HORTON, to generate the list of DFT functionals in the documentation.

The documentation is compiled and viewed as follows:

(cd doc; make html; firefox _build/html/index.html)

1.1.2. Git

1.1.2.1. Git configuration

We recommend you to set the following in your ~/.gitconfig file:

[user]
    name = {Replace by your official name: First M. Last}
    email = {Replace by a decent e-mail address, cfr. corresponding author on a paper.}

[color]
    diff = auto
    status = auto
    interactive = auto
    branch = auto

[push]
    default = simple

Also, install our pre-commit script as follows:

cp -a tools/qa/check_commits.py .git/hooks/pre-commit

This hook imposes some baseline quality checks on each commit.

Furthermore, it is useful to include the current branch in your shell prompt. To do so, put one of the following in your ~/.bashrc (Linux) or ~/.bash_profile (Mac OS X) file:

  • For terminals with a dark background:

    GIT_PS='$(__git_ps1 ":%s")'
    export PS1="\[\033[1;32m\]\u@\h\[\033[00m\] \[\033[1;34m\]\w\[\033[00m\]\[\033[1;33m\]${GIT_PS}\[\033[1;34m\]>\[\033[00m\] "
    
  • For terminals with a light background:

    GIT_PS='$(__git_ps1 ":%s")'
    export PS1="\[\033[2;32m\]\u@\h\[\033[00m\]:\[\033[2;34m\]\w\[\033[3;31m\]${GIT_PS}\[\033[00m\]$ "
    

You can customize it to your taste. You may also want to add the export PROMPT_DIRTRIM=3 line to keep the shell prompt short. If you are a happy vim user, you can set export EDITOR=vim to get syntax highlighting when writing commit messages.

1.1.2.2. Some terminology

Patch
A set of changes in the source code. These are typically recorded in a patch file. Such a file specifies a set of lines that are removed and a set of lines that are added.
SHA-1 hash
A numerical checksum of a given length in bytes (in this case 256) for a much larger amount of data, e.g. a very long character string. There are usually two main goals when designing hashing algorithms: (i) it is not possible to derive the original data from a hash and (ii) a small change in the original data completely changes the hash. The MD5 checksum is well known and often used for CD images, but it is not great in terms of the above two hashing objectives.
Commit
A patch with some extra information: author, timestamp, a SHA-1 hash of the code to which it applies, and some other things.
Branch

A series of commits that describe the history of the source code.

In realistic projects, the source code history is not linear, but contains many deviations from the master branch where people try to implement a new feature. It is, however, useful to have only one official linear history. We will show below how this can be done with git.

Branch HEAD
The last commit in a branch.

1.1.2.3. Cloning the HORTON git repository

In order to clone the public HORTON repository, run the following commands:

mkdir ~/code
cd ~/code
git clone git://github.com/theochem/horton.git
cd horton

The version history can be updated with the latest committed patches on GitHub by:

git pull

There is also a web interface to HORTON’s git repository: https://github.com/theochem/horton

1.1.3. Work flow for adding a new feature

The development of a new feature typically consists of the following steps:

  1. You make modifications of the code in a topic branch. You test and document your modifications, fix problems where needed.
  2. Make a pull request on Github. (Some tests will be automatically executed.) Someone will review your pull request, which usually leads to suggestions to improve your modifications.
  3. As soon as you pull request is up to snuff, it will be merged into the master branch.

Note

Try to keep the amount of work in one branch as low as possible and get it reviewed/merged as early as possible. This takes some planning, as you have to figure out how to break your big plans up into smaller steps. In general this is a good exercise that will help you write more modular code. Although this seems to be cumbersome, it does save time for everyone involved.

When you intend to make relatively large modifications, it is recommended to discuss these first, e.g. on the HORTON mailing list, just to avoid disapointments in the long run.

1.1.3.1. Develop the feature in a topic branch

  1. Fork the public HORTON repository on Github (if not done yet), clone it on your local machine and enter the source tree:

    $ ~/code> git clone https://github.com/your_account/horton.git
    $ ~/code> cd horton
    $ ~/.../horton:master>
    

    where your_account needs to be replaced by your Github account name.

  2. Switch to the master branch, if needed:

    $ ~/.../horton:foo> git checkout master
    $ ~/.../horton:master>
    

    Make sure there are no uncommitted changes in the source code on the foo branch before switching to the master branch.

  3. Get the latest version of the source code:

    $ ~/.../horton:master> git pull origin
    
  4. Make a topic branch, say bar, and switch to it:

    $ ~/.../horton:master> git checkout -b bar
    $ ~/.../horton:bar>
    

    Make sure that you are on the right branch before starting to implement the new feature bar. (Try to pick a more meaningful branch name based on the feature you are implementing.)

  5. Now you are in the right place to start making changes to the source code, and committing patches. When adding a new feature, also add tests, documentation, docstrings, comments and examples to clarify and debug the new feature. (The more tests, documentation and examples, the better.)

  6. Review your changes with git diff. Make sure there are no trailing white spaces or trailing blank lines. These can be removed with the ./cleancode.sh script. If you created new files, run the ./updateheaders.py script to make sure the new files have the proper headers.

  7. Get an overall overview of the added changes and new files with git status.

  8. Add the changed files that will be committed with git add <file_name> command. There are two ways to do this:

    • Add all changes in certain files:

      $ ~/.../horton:bar> git add horton/file1.py horton/file2.py ...
      
    • Add interactively by going through the changes in all/some files:

      $ ~/.../horton:bar> git add -p [horton/file1.py horton/file2.py ...]
      
  9. Commit the added files to your working branch:

    $ ~/.../horton:bar> git commit
    

    This command will start an editor in which you can write a commit message. By convention, such a message starts with a short single-line description of at most 69 characters. Optionally, a longer description follows that is separated from the short description by an empty line. More suggestions for writing meaningful commit messages can be found here. If you only intend to write a short description, it can be included on the command line:

    $ ~/.../horton:bar> git commit -m 'Short description'
    

In practice, you’ll make a couple of commits before a new feature is finished. After committing the changes and testing them thoroughly, you are ready for the next step.

1.1.3.2. Make your branch available for review with a pull request (PR)

In order to let others look at your code, you have to make your branch available by pushing it to your forked Github repository.

  1. Push your branch to the remote server:

    git push origin bar:bar
    
  2. Now go to the Github website and make a Pull Request with the master branch of the theochem/horton repository as the destination. As soon as you do this, a series of basic QA tests will be executed to check for common problems. If these basic QA tests pass, someone will review your branch manually based on the Branch review checklist. You fix all the issues brought up during the review by making additional commits or, if you really messed up, by rewriting your branch. As soon as you push your changes back to the branch in your forked repository, they will show up in the PR, which triggers again the QA tests. When there are no further comments, your branch is ready to be merged.

1.1.3.3. Merging your pull request with the master branch

You don’t have to do anything for this, unless other branches got merged into the master branch after you started your topic branch. In that case, you need to rebase your topic branch on the current master branch and rerun all tests. This can be done with the following steps:

  1. Synchronize the master branch in your fork with the official HORTON repository.
  1. Switch to your topic branch:

    $ ~/.../horton:master> git checkout bar
    $ ~/.../horton:bar>
    
  2. Create a new branch in which the result of git rebase will be stored:

    $ ~/.../horton:bar> git checkout -b bar-1
    $ ~/.../horton:bar-1>
    
  3. Rebase your commits on top of the latest master branch:

    $ ~/.../horton:bar-1> git rebase master
    

    This command will try to apply the patches from your topic branch on top of the master branch. It may happen that changes in the master branch are not compatible with yours, such that your patches cannot be simply applied. When that is the case, the git rebase script will be interrupted and you are instructed on what to do. Do not panic when this happens. If you feel uncertain about how to resolve conflicts, it is time to call your git-savvy friends for help.

  4. After the rebase procedure is complete, run all the tests again. If needed, fix problems and commit the changes.

  5. Upload the commits to your fork:

    $ ~/.../horton:bar-1> git push origin -f bar-1:bar
    

    This will rewrite the history of your topic branch, which will also show up in the PR. All automatic QA tests will be executed again.

1.1.4. Common issues

  • Remember to set the pre-commit hook. If this causes error messages when committing, use the cleancode.sh script. This removes all sorts of trailing white-space and converts every tab to four spaces. These conventions make git diff more meaningful and make it easier to merge and rebase commits.

  • When you are customizing your bash prompt, you may get an error like __git_ps1: command not found..., if you sourced git-completion.bash. Then, before setting the GIT_PS, you need to add the following line to your ~/.bashrc (Linux) or ~/.bash_profile (Mac OS X):

    source /usr/share/git-core/contrib/completion/git-prompt.sh
    

    If you cannot find this file, you can get it from the link below: https://github.com/git/git/blob/master/contrib/completion/git-prompt.sh