# 1.4. Troubleshooting¶

On a fresh Linux or Mac machine, the instructions given in the “Download and Install” guides should result in a working installation of HORTON, without using any of the suggestions below. In reality, however, the Unix system of an average researcher isn’t pristine but rahter ranges from cleverly customized to completely borked. Such customizations may interfere with the installation of HORTON. This section provides some guidance for the novice Unix user on how to get HORTON working on a not-so-well-maintained Unix system.

If you are still stuck after trying the suggestions in this section, do not hesitate to contact us on the the HORTON mailing list.

## 1.4.1. Introduction¶

Let us assume you have already built and installed all your dependencies. However, when you try to install HORTON, i.e.

./setup.py install --user


or when you run nosetests, you get an unexpected error message. The problem is most likely related to finding and using the dependencies. You have to make sure setup.py and the HORTON modules can find the right dependencies and are able to use them. We have seen problems with three types of dependencies: Python modules, executables, and libraries.

## 1.4.2. Python modules¶

If you have installed a python package (e.g. NumPy, SciPy, Cython, H5Py, SymPy, MatPlotLib, Nosetests, Sphinx, Breathe, Docutils) and you get an error saying your system cannot find that package, then you need to check the directories in which Python searches for package. These are stored in the attribute path of the sys module, which can be accessed by:

python -c "import sys; import pprint; pprint.pprint(sys.path)"


A typical output can be as follows (but is probably different in your case):

['',
'/usr/lib64/python27.zip',
'/usr/lib64/python2.7',
'/usr/lib64/python2.7/plat-linux2',
'/usr/lib64/python2.7/lib-tk',
'/usr/lib64/python2.7/lib-old',
'/home/foo/.local/lib/python2.7/site-packages',
'/usr/lib64/python2.7/site-packages',
'/usr/lib64/python2.7/site-packages/gtk-2.0',
'/usr/lib/python2.7/site-packages']


If you installed a Python package in another directory, Python will not be able to load it. This can be fixed by adding your directory to the PYTHONPATH variable in your ${HOME}/.bashrc (Linux) or ${HOME}/.bash_profile (Mac), e.g.

export PYTHONPATH=/some/custom/path/lib/python2.7/site-packages:${PYTHONPATH}  The next time you start Python (or any program implemented in with Python), the packages you installed in a non-standard location will become importable. If the same Python module or package is installed in multiple directories, the one found in the first directory in the sys.path list takes precedence. A typical problem is that there are multiple lines like these in .bashrc or .bash_profile of which the last is overwriting the former ones, e.g.: export PYTHONPATH=/some/custom/path/lib/python2.7/site-packages:${PYTHONPATH}
# and several lines further ...
export PYTHONPATH=/some/other/path/lib/python2.7/site-packages


The second export line overrides the first one because it does not end with :${PYTHONPATH}. Some examples are given below. Note that, in principle, none of these should be necessary but they seem to have helped people with a broken installation of Python: • Some Mac users needed to set the PYTHONPATH after installing modules through PIP: export PYTHONPATH=${HOME}/Library/Python/2.7/lib/python/site-packages:${PYTHONPATH}  or their system site-packages: export PYTHONPATH=/Library/Python/2.7/lib/python/site-packages:${PYTHONPATH}

• Similarly, a few Linux users needed to set PYTHONPATH after installation through PIP:

export PYTHONPATH=${HOME}/.local/lib/python2.7/site-packages:${PYTHONPATH}


or

export PYTHONPATH=/lib/python2.7/site-packages:${PYTHONPATH}  or export PYTHONPATH=/lib64/python2.7/site-packages  ## 1.4.3. Excecutables¶ During the installation (or when building the documentation) HORTON will use some executables, e.g. a compiler, sphinx-build, etc. These executables must be in one of the directories in the PATH environment variable. The essential changes to the PATH variable were already discussed in the “Download and install” guides but if your system is somehow broken, more changes may be needed. The contents of PATH can be accessed by: echo$PATH


In unfavorable circumstances, some directories may be missing from the PATH, e.g because it got carelessly overwritten in ${HOME}/.bashrc (Linux) or ${HOME}/.bash_profile (Mac). For example, the following should be avoided:

export PATH=/some/custom/path/bin


Instead, make sure the existing PATH variable is included as follows:

export PATH=/some/custom/path/bin:${PATH}  If the same executable name occurs in several directories in the PATH, the one in the first directory takes precedence. The following examples are in principle not needed but they seemed to be helpful for some: • Mac users that uses python scripts might do # Already mentioned in "Download and install" guide: export PATH=${HOME}/Library/Python/2.7/bin:${PATH} # Should already be in the PATH anyway, unless your system is broken: export PATH=/Library/Python/2.7/bin:${PATH}

• Similarly, Linux users may do

# Already mentioned in "Download and install" guide:
export PATH=${HOME}/.local/bin:${PATH}
# Should already be in the PATH anyway, unless your system is broken:
export PATH=/usr/bin:\${PATH}


When you forgot where you installed a dependency, the find command may help you find the appropriate directory. The following example will search for location of the sphinx-build executable:

find / | grep sphinx-build


## 1.4.4. Libraries¶

You need to make sure setup.py can find the necessary libraries. You should consult Controlling dynamic/static linking against LibXC, LibInt2 and BLAS for a more complete understanding of the library linking process when installing HORTON. Here, we will show how we solved some library problems we encountered before.

First, you need to locate the library that can not be found by setup.py. You can locate libraries in standard directories by using the unix command ldconfig:

ldconfig -p | grep libraryname


ldconfig -p prints all cached libraries, and piping to grep searches through the results for the library with the libraryname. This only works when a library is installed in a standard location and the library cache is up-to-date. If you can not find it with ldconfig, you may try to used the find command, e.g.:

find / | grep libraryname


Here is an example that searches for the Atlas libraries on a cluster:

ldconfig -p | grep atlas


which gives

libptf77blas.so.3 (libc6,x86-64) => /usr/lib64/atlas/libptf77blas.so.3
libptf77blas.so (libc6,x86-64) => /usr/lib64/atlas/libptf77blas.so
libptcblas.so.3 (libc6,x86-64) => /usr/lib64/atlas/libptcblas.so.3
libptcblas.so (libc6,x86-64) => /usr/lib64/atlas/libptcblas.so
liblapack.so.3 (libc6,x86-64) => /usr/lib64/atlas/liblapack.so.3
liblapack.so (libc6,x86-64) => /usr/lib64/atlas/liblapack.so
libf77blas.so.3 (libc6,x86-64) => /usr/lib64/atlas/libf77blas.so.3
libf77blas.so (libc6,x86-64) => /usr/lib64/atlas/libf77blas.so
libclapack.so.3 (libc6,x86-64) => /usr/lib64/atlas/libclapack.so.3
libclapack.so (libc6,x86-64) => /usr/lib64/atlas/libclapack.so
libcblas.so.3 (libc6,x86-64) => /usr/lib64/atlas/libcblas.so.3
libcblas.so (libc6,x86-64) => /usr/lib64/atlas/libcblas.so
libatlas.so.3 (libc6,x86-64) => /usr/lib64/atlas/libatlas.so.3
libatlas.so (libc6,x86-64) => /usr/lib64/atlas/libatlas.so


All the libraries are located in /usr/lib64/atlas/. Notice that all the libraries use the x86-64 instruction set.

Next, we need to find the include directory. You can find this with the find command function. Usually, the include directory is almost same as the library directory, except instead of the lib or lib64, it reads include. Continuing the above example,

ls -d /usr/include/*atlas*


will give the list of directories that includes the word atlas. The output gives:

/usr/include/atlas
/usr/include/atlas-x86_64-base


Since we used the x86-64 instruction set, we select the directory that would correspond with that instruction set, i.e. /usr/include/atlas-x86_64-base. (This should not matter too much as header files are normally indepedent of the architecture.)

In the above list of libraries associated with atlas, we have ptf77blas, ptcblas, lapack, f77blas, clapack, cblas, and atlas. Though we can include all these libraries, HORTON only uses atlas and cblas. Therefore, the resulting setup.cfg file includes

[blas]
library_dirs=/usr/lib64/atlas
libraries=atlas:cblas
include_dirs=/usr/include/atlas-x86_64-base


Similarly, we can repeat the process for the LibXC and Libint2, where the libraries that are needed are only libxc and libint, respectively. See Controlling dynamic/static linking against LibXC, LibInt2 and BLAS for more details.